![]() |
|
|
|
|
||||
Electric Heating Co., Inc |
||||||||
Center Groove
If the heater is 1/2" diameter and longer than 7" or any larger diameter, it must be center grooved. This groove will extend roughly 6" into the heater from the terminal end, and a needle-type thermocouple can be inserted.
This can be assembled into a header with stainless hose or braid and forms a convenient package for heat and control.
The thermocouple will still monitor the sheath heat at a location more accurate to the actual temperature being transferred to the host metal. Conventional heaters are restricted to measuring internal coil temperature.
Friday FunniesFOR LEXOPHILES (LOVERS OF WORDS):
|
home | cartridge
heaters | immersion
heaters | vacuum diffusion pump heaters contact us | about dalton Dalton Electric Heating Co., Inc (978)356-9844 (C) Copyright -2007. Dalton Electric Heating Co, Inc. All Rights Reserved. |